SuperTrend超级趋势EA_根据国外指标FX Vortex 2.0开发的新版SuperTrend超级趋势（源码）

SuperTrend超级趋势是一款优秀的商业EA，也经过了好几年的市场验证，我本人也改版过一次并在EAhub做了发布分享（1.狼行天下_超级趋势版_V 24.01.20.ex4）。

SuperTrend超级趋势EA的策略逻辑原理：

1、根据趋势周期(参数)确定一个箱体，周期越大箱体越大；如果当前价格-箱体底部>趋势间距(参数)，则当前为上涨趋势；如果箱体顶部-当前价格>趋势间距(参数)，则当前为下跌趋势。

2、趋势确定了，接下来就该确定超买超卖了。上涨趋势，并且超卖，做多；下跌趋势，并且超买，做空。

3、超买超卖由震荡参数确定。震荡周期(参数)控制检测的K线数；震荡间距(参数)控制震荡大小；震荡水平(参数)控制开仓水平位。

今天为什么提到了这款EA呢？

因为我又开发了一款和这款EA类似的软件，不过相对于SuperTrend超级趋势EA，新开发的这款EA是基于一款国外的指标进行开发的，这款EA也是利用箱体进行突破下单，并给出了TP1/TP2/TP3 三个止盈位置.（当然我开发的EA都是存在加仓模式的，这一点需要你自己根据风险承受能力来设置参数）！

现在把这款新EA分享给大家，没有任何限制，订单注释大家可以随意修改。

适用货币：趋势类货币

调用指标：FXVORTEX / FXVORTEXA / FXVORTEXB / FXVORTEXC

指标是相同的 只是内部参数不同 根据指标作者介绍分别适用于低波动性市场的货币和高波动性市场的货币。

文章后面把原作者对于指标的介绍加上的（英文版）。

参数介绍：

FXVOR指标名称="FXVORTEX"; 填写修改要调用的指标名称 一共四个FXVORTEX / FXVORTEXA / FXVORTEXB / FXVORTEXC

是否开启FXVOR信号首多=true;

是否开启FXVOR信号首空=true;

逆势间隔N微点加仓_0为关闭=350; 亏损加仓的间距

是否开启首次逆势加仓于SL处=true;第一次亏损加仓为灰色箱体的上下沿

建仓手数_可增减="0.01/0.02/0.05/0.1/0.2/0.3/0.5/0.8/0.9/1/2/3/4/5"; 可以设置每一次加仓的手数 用“/”符号来间隔

单向持仓最大N单=10; 单方向加仓后最大加仓几次

平仓参数：根据指标三个止盈点（TP1/TP2/TP3）来设置止盈和保本位置 

订单盈利超过TP1N微点后_0为关闭=0;

保本止损于TP1附近N微点处_0为关闭=0;

订单盈利超过TP2N微点后_0为关闭=100;

保本止损于TP2附近N微点处_0为关闭=1;

订单盈利超过TP3N微点后_0为关闭=100;

保本止损于TP3附近N微点处_0为关闭=1;

单向首尾两单盈利N美元平仓_0为关闭=10;

单向盈利N美元平仓_0为关闭=20;

单向亏损N美元平仓_0为关闭=0;

下面是调用指标的介绍：

FX VORTEX

System Manual

UPDATE (23.03.2020): Since the volatility on the markets has

drastically increased, we have introduced the 3rd and 4th

template (FXVORTEX3 and FXVORTEX4) and 2 more

indicators. We recommend those templates as standard one

till the markets go back to standard volatility.

Choose your trading pair and timeframe. Right click on the chart. Pick

‘FXVORTEX” from templates.

System provides 4 different templates. If you prefer standard trading, use the

FXVORTEX1, FXVORTEX2 (for low volatility market). FXVORTEX3 and FXVORTEX4

(for high volatility markets).

Other templates are also useful with some less popular trading pairs. If you

open a chart and see a small numbers of signals, check the FXVORTEX3 or

FXVORTEX4 template

System is ready for trading.

2. How does it work – BUY trade example.

Fx Vortex algorith main task is to look for gravity zones and generate buy/sell

signal with exact SL and TPs location.

When specified conditions are fulfilled, a grey rectangle appears on the chart.

This is the place where the price is getting ready for further move.

Price still in the narrow range. Waiting for signal. 

As we can see price finally broke to the upside. We can see SL/TP1/TP2/TP3

levels. This is a valid buy signal. 

The trade should remain open until it hits take profit. As we can see on the below

example it went much higher than the TP3 level.

3.How does it work – SELL trade example.

The sell signal works in a similar way with the only difference that levels are set

to the downside, not to the upside.

When specified conditions are fulfilled, a gray rectangle appears on the chart.

This is the place where the price is getting ready for further move.

Waiting for signal..

When the signal is produced, you will see colorful (red) squares on the chart

which shows exact SL and TP places.

This is a valid SELL signal.

Few hours later the price hits TP3.

4.STOP LOSS Order.

SL level is always printed on the opposite side to the signal.

It's usually enough space for the transaction for small pullbacks and making a

profit. However, if it's too small for you, you can move the SL for a few pips more

for example to the round level or an important support/resistance level.

5.TAKE PROFIT Order.

Each signal gives us 3 different take profit levels. This number is not accidental,

because it reflects every type of trader from a very conservative one, through a

standard one to a much more favorable RR ratio.

How to use it correctly? The simplest method is to observe the price. If it moves

quickly and dynamically, we can usually count on TP3. If it has difficulties with

volatility, or the market is just about to close an important trading session (like

EU or US), it’s better to aim for lower values like TP1 or TP2.

6.DASHBOARD Indicator.

The system is also equipped with a trading dashboard which will assist you during

a trading.

It provides important information like trading pair/timeframe/time to the next

candle, spread value, ATR values from XXX days, current ATR values, Swap value.

7. FAQ.

How long does the signal is valid, after the colored boxes are printed on the

chart?

The signal is valid until the price hits SL or TP3 level, or when next signal is

created.

What should I do if I miss the entry?

If the price is far from the entry point you should wait for the next signal.

What lot size should I use when trading this system?

You should always control your risk. Most traders use 1-2% of their account for

any opened transaction.

What timeframe should I trade?

It depends on your trading style. If you prefer fast scalping use M1 – M5 TF. If

you like typical daytrading, you can focus on M5-H1 TFs. If you like slow swing

trading check the signals on H1/H4/D1 TFs.

I prefer the bigger number of signals during my trading, what should I do?

System provides 2 templates. If you prefer standard/conservative trading go

with the FXVORTEX1 template. However if you prefer a larger number of

signals go with the FXVORTEX2 template.

指标介绍就到这里了，最后附上一张欧美历史回测图：

该EA回测表现要优于SuperTrend超级趋势的，有喜欢的朋友可以试试！

关注我，成为我的粉丝！

后续会发布分享更多我开发的EA供大家免费试用！

@EAMQL狼行天下